Sharp MX-M264N User Manual
Page 310
3-74
PRINTER SPECIFICATIONS
*1 When the PS3 expansion kit is installed and the machine is used as a PostScript printer.
*2 Barcode font kit is required.
Type
Built-in
Continuous printing speed
MX-M264N: 26 pages/min
MX-M314N: 31 pages/min
MX-M354N: 35 pages/min
(When printing same document continuously on A4 (8-1/2"x11") plain paper in non-offset mode,
excluding processing time.)
Printing resolution
600x600 dpi, 1200x600dpi
Printer driver type
PCL6, PostScript 3 compatible*
1
Supported protocols
TCP/IP, IPX/SPX, NetBEUI, EtherTalk*
1
Supported client PC
operating systems
See "VERIFYING SYSTEM REQUIREMENTS" in the Software Setup Guide.
Fonts
PCL6
80 European fonts, 28 barcode fonts*
2
, 1 bitmap font
PostScript 3 compatible*
1
136 European fonts
Interface port
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity: Supports USB 2.0 (Hi speed)
Memory
Standard system memory: 2 GB
Print area
Entire page excluding margin of 4.2 mm (11/64") at each edge. The actual print area may vary
depending on the printer driver and the software application.