Sharp MX-M264N - Manual (Page 671)

7-39
SYSTEM SETTINGS
Contents
*1 When the hard disk drive and Internet fax expansion kit are installed.
*2 When the facsimile expansion kit is installed.
*3 When network connection is enabled.
*4 This function is not available in some countries and regions.
‹ Speaker Volume Setting –
7-82 • Receive Signal Middle
• Communication Error Signal Middle
‹ Original Print on Transaction Report Print Out Error Report Only 7-82
‹ Transaction Report Print Select Setting
7-82
• Single Sending Print Out Error Report Only
• Broadcasting Print Out All Report
• Receiving No Printed Report
‹ Activity Report Print Select Setting
7-83 • Auto Print at Memory Full Disabled
• Print Daily at Designated Time Disabled
‹ Body Text Print Select Setting Disabled 7-83
‹ Pre-Setting Mail Signature Disabled 7-83
X I-Fax Send Settings 7-83
‹ I-Fax Reception Report On/Off Setting Disabled 7-83
‹ I-Fax Reception Report Request Timeout Setting 1 hour 7-83
‹ Number of Resend Times at Reception Error 2 7-83
‹ Maximum Size of E-mail Attachments Unlimited 7-83
‹ Rotation Sending Setting All Enabled 7-84
‹ Printing Page Number at Receiver Enabled 7-84
‹ Recall in Case of Line Busy Times: 2, Interval 3 min. 7-84
‹ Recall in Case of Communication Error Times: 2, Interval 3 min. 7-84
X I-Fax Receive Settings 7-84
‹ Auto Receive Reduce Setting Enabled 7-84
‹ Duplex Reception Setting Disabled 7-84
‹ Set Address for Data Forwarding –
7-84
• Direct SMTP Disabled
• Add Hostname or IP Address Too Disabled
• Hostname or IP Address –
‹ Letter Size RX Reduce Print * 4 Disabled 7-85
‹ Receiving Date & Time Print Disabled 7-85
‹ A3 RX Reduce * 4 Disabled 7-85
‹ POP3 Communication Timeout Setting 60 sec. 7-85
‹ Reception Check Interval Setting 5 min. 7-85
‹ I-Fax Output Setting Varies depending on the machine configuration 7-85
X
Allow/Reject Mail or Domain Name Setting All Invalid 7-85
Item Factory default setting Page