Sharp MX-M264N User Manual
Page 55
1-14
TURNING THE POWER ON AND OFF
The machine has two power switches. The main power switch is towards the rear on the left side. The other power
switch is the [POWER] key (
) on the operation panel at the top right.
Main power switch
When the main power switch is switched on, the main
power indicator on the operation panel lights up.
[POWER] key
Turning on the power
(1) Switch the main power switch to the "on"
position.
(2) Press the [POWER] key (
) to turn on the
power.
Turning off the power
(1) Press the [POWER] key (
) to turn off the
power.
(2) Switch the main power switch to the "off"
position.
Restarting the machine
In order for some settings to take effect, the machine must be restarted.
If a message in the touch panel prompts you to restart the machine, press the [POWER] key (
) to turn off the power
and then press the key again to turn the power back on.
"On" position
"Off" position
Main power indicator
[POWER] key
• If the main power indicator is blinking, press the [POWER] key (
) after it becomes steadily lit.
• When turning off the main power switch, ensure that each of the lamps on the operation panel has been turned off.
• In the event that the main power is suddenly interrupted due to a power failure or other reason, turn the machine power
back on and then turn it off in the correct order. If the machine is left for a long time with the main power having been
turned off prior to the [POWER] key (
), abnormal noises, degraded image quality, and other problems may result.
Switching off the main power switch or removing the power cord from the outlet while any of the indicators are lit or blinking
may damage the hard drive and cause data to be lost.
• Switch off both the [POWER] key (
) and the main power switch and unplug the power cord if you suspect a machine
failure, if there is a bad thunderstorm nearby, or when you are moving the machine.
• The main power indicator blinks when a print job is received. Once the print job data is received and the printing starts, the
PRINT DATAT indicator becomes lit.
• When using the fax or Internet fax function, always keep the main power switch in the "on" position.
In some states of the machine, pressing the [POWER] key (
) to restart will not make the settings take effect. In this case,
use the main power switch to switch the power off and then on.