Sharp MX-M264N User Manual
Page 643
7-11
Default Settings
The default settings for operation of the machine can be configured. Touch the [Default Settings] key and select the settings.
Clock Adjust
Use this to set the date and time in the machine's built-in clock.
Set the time.
Daylight Saving Time Setting
Enable daylight saving time.
When this function is used, the time changes at the beginning and end of daylight saving time as indicated in the table
below.
* In some countries, the starting and ending times of daylight saving time may be different than the times set in the machine.
Item
Settings
Specify Time Zone
If your region is ahead of GMT (Greenwich Mean Time), select [+]. If your region is
behind GMT, select [-]. Next, specify the time difference between your region and
GMT in hours and minutes.
Date&Time Settings
Select and set the year, month, day, hour, and minute.
Synchronize with Internet Time Server
This can be used when the machine is connected to the Internet. The machine's time
is automatically adjusted to the time of an Internet time server.
Item
Settings
Daylight Saving Time Setting
Select whether or not the Daylight Saving Time Setting is enabled. If disabled, the
following settings will not be possible.
Select Setting Type
Specify whether the starting and ending day of daylight saving time are to be set
using the day of the week or the date.
Start Time
Set the starting time of daylight saving time. Set the starting month. If you selected "Day
of the Week" in "Select Setting Type", set the starting week of daylight saving time and
then the starting day. If you selected "Date" in "Select Setting Type", set the starting date.
Set the hour and minute and the UTC (Coordinated Universal Time) setting.
Completing Time
Set the ending time of daylight saving time in the same way as you set the starting
time.
Adjustment Time
Set the time that adjustment will take place when daylight saving time begins.
Area
Standard time Daylight saving time
Daylight saving time Standard time
Europe*
Last Sunday in March, 1:00 to 2:00 AM
Last Sunday in October, 1:00 to 0:00 AM
Australia, New Zealand
Last Sunday in October, 2:00 to 3:00 AM
Last Sunday in March 3:00 to 2:00 AM
Other countries
Select the [Daylight Saving Time Setting] checkbox so that a checkmark
appears. The clock
setting is configured to normal time plus one hour. When the
is selected, clock returns to
normal time.