Sharp MX-M264N - Manual (Page 43)

1-2
BEFORE USING THE MACHINE
Contents
This section provides basic information about the machine. Please read this chapter before using the machine.
PART NAMES AND FUNCTIONS
EXTERIOR
(1) Job separator (upper tray)*
Received faxes and printed papers are delivered to this
tray.
(2) Automatic document feeder
This automatically feeds and scans multiple originals. Both
sides of 2-sided originals can be automatically scanned.
PLACING THE ORIGINAL (page 1-36)
(3) Front cover
Open this cover to replace a toner cartridge.
REPLACING THE TONER CARTRIDGES (page
1-51)
(4) Output tray (centre tray)
Output is delivered to this tray.
(5) Operation panel
This is used to select functions and enter the number of
copies.
OPERATION PANEL (page 1-7)
(6) Exit tray unit (right tray) *
When installed, output can be delivered to this tray.
When a finisher is installed.
(7) Finisher*
This can be used to staple output.
FINISHER (page 1-42)
* Peripheral device.
BEFORE USING THE MACHINE
(2) (1) (3) (4) (6) (7) (5)
When a finisher is installed
When an exit tray unit is installed