Sharp MX-M264N - Manual (Page 544)

5-96
SCANNER/INTERNET FAX
Contents
ELIMINATING BLANK PAGES FROM A
TRANSMISSION (Blank Page Skip)
When blank pages are included in originals scanned using the automatic document feeder, the blank pages can be
detected and automatically eliminated from transmission.
• This function cannot be used in Internet fax mode.
• Depending on the original, some pages that are not blank may be detected as blank pages and thus not sent, and some
pages that are blank may not be detected as blank and thus sent.
• When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
1
Insert the originals face up in the
document feeder tray.
This function cannot be used when the document glass is used
for scan send.
2
Specify the destination.
ENTERING DESTINATIONS (page 5-18)
When scanning to USB memory, there is no need to specify the destination. Go to step 3.
3
Select the special modes.
(1) Touch the tab of the mode that you wish to use.
(2) Touch the [Special Modes] key.
(3) Touch the keys to switch through the screens.
(4) Touch the [Blank Page Skip] key.
SPECIAL MODES (page 5-71)
Blank pages
Send
Blank pages are not sent