Sharp MX-M264N User Manual
Page 655
7-23
Printer Condition Settings
The Printer Condition Settings are used to configure basic printer settings and settings for printing from a DOS
application. To configure the settings, touch the [Printer Condition Settings] key.
Printer Default Settings
The default settings are used to set advanced print conditions for printing in an environment where the print driver is not
used (such as printing from MS-DOS or from a computer that does not have the provided print driver installed).
Settings
*1 When a finisher is installed.
*2 This setting is used to adjust the line width of vector graphics. Except for CAD and other specialized uses, there is
normally no need to change this setting. When "0" is selected, all lines are printed at a width of 1 dot.
*3 Paper sizes that can be used with this function are A3, B4, A4, 11" x 17", 8-1/2" x 14", and 8-1/2" x 11". (This function
may not take effect with some print methods.)
*4 Only effective when printing PDF, JPEG, and TIFF files.
These settings can be used when the hard disk drive and printer expansion kit are installed.
When printing using the printer driver, the printer driver settings take precedence over the printer condition settings.
Item
Selections
Copies
1 - 999 sets
Orientation
• Portrait
• Horizontal
Default Paper Size
A3, B4, A4, B5, A5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 5-1/2" x 8-1/2", 8k, 16k
Default Output Tray
• Centre Tray
• Offset Tray*
1
• Upper Tray
• Right Tray
Default Paper Type
Plain Paper, Letter Head, Pre-Printed, Pre-Punched, Recycle Paper, Colour
Initial Resolution Setting
• 600 x 600 dpi
• 1200 x 600 dpi
Disable Blank Page Print
•
(Disabled)
•
(Enabled)
Line Thickness*
2
0-9
2-Sided Print
• 1-Sided
• 2-Sided (Book)
• 2-Sided (Tablet)
N-Up Print*
3
• 1-Up
• 2-Up
• 4-Up
Fit To Page*
4
•
(Use Fit to Page)
•
(Do not use Fit to Page)
Output
•
(Use Print per Unit)
•
(Do not use Print per Unit)
• Staple Position*
1
: None, 1 Staple
Quick File
•
(Disabled)
•
(Enabled)