Sharp MX-M264N - Manual (Page 676)

7-44
SYSTEM SETTINGS
Contents
*1 When the automatic document feeder is installed.
*2 When a paper drawer is installed.
*3 When a finisher is installed.
*4 When the hard disk drive is installed.
*5 When network connection is enabled.
*6 When the Internet fax expansion kit is installed.
*7 When the facsimile expansion kit is installed.
*8 When the hard disk drive is installed.
Change Administrator Password
N Image Send Settings 7-92
X Other Disabling 7-92
‹ Disable Switching of Display Order Disabled 7-92
‹ Disable Scan Function
7-92 • PC Scan Disabled
• USB Memory Scan Disabled
X Settings to Disable Registration 7-92
‹ Disable Registering Destination from Operation Panel All disabled 7-92
‹ Disable Registering Destination on Web Page * 5 All disabled 7-93
‹ Disable Registration of Program All disabled 7-93
‹ Disable Registration of Memory Box All disabled 7-93
‹ Disable Destination Registration Using Global Address
Search
* 5
All disabled
7-93
‹ Disable Registration Using Network Scanner Tools * 5 Disabled 7-93
X Settings to Disable Transmission 7-93
‹ Disable [Resend] on Image Send Mode Disabled 7-93
‹ Disable Selection from Address Book All disabled 7-93
‹ Disable Direct Entry All disabled 7-93
‹ Disable PC-I-Fax Transmission * 6 Disabled 7-93
‹ Disable PC-Fax Transmission * 7 Disabled 7-93
N Document Filing Settings * 8 7-93
X Disable Stamp for Reprinting Disabled 7-93
X Batch Print Settings
7-93 ‹Selection of [All Users] is not allowed. Enabled
‹Selection of [User Unknown] is not allowed. Enabled
Item Factory default setting Page
P Change Administrator Password
See "TO THE ADMINISTRATOR OF
THE MACHINE" in the Start Guide.
7-94
Item Factory default setting Page