Toshiba Magnia Z310 - Manual (Page 77)

68
3.6.4.4 Station Statistics
Value Description
Date Date when the data was collected.
Formats set under [Regional Options] on the Control Panel are
supported.
Time Time when the data was collected.
Formats set under [Regional Options] on the Control Panel are
supported.
State [Disabled], [Enabled], [Requesting authentication],
[Authenticating], [Authentication failed], [Authentication
succeeded], or [Unknown] is displayed.
TxUnicastFrames Total number of frames transmitted (unicast) by the access point
to the station.
TxUnicastBytes Total frame length (total bytes) transmitted (unicast) by the
access point to the station.
RxUnicastFrames Total number of frames received (unicast) by the access point
from the station.
RxUnicastBytes Total frame length (total bytes) received (unicast) by the access
point from the station.
RxMulticastFrames Total number of frames received (multicast) by the access point
from the station.
RxMulticastBytes Total frame length (total bytes) received (multicast) by the access
point from the station.
RxUnicastFrames
( Mbps)
Total number of frames received in Mbps (unicast) by the
access point from the station.
will be as follows:
For 802.11b: 1, 2, 5, 5.5, 8, 11
For 802.11a: 6, 9, 12, 18, 24, 36, 48, 54
ElapsedTime Elapsed time after the wireless data link was established.
IdleTime Elapsed time after the last data was received.
dB Min Minimum value of the received frame's radio wave strength.
dB Last Radio wave strength of the last frame received.
dB Max Maximum value of the received frame's radio wave strength.
EAP/Identity 802.1X authentication user ID.
EAP-Type 802.1X authentication type (MD5, TLS, TTLS, PEAP, etc.).
AuthRule Name of authentication rule used for the authentication.
AuthServer Name of the RADIUS server used for the authentication.
ElapsedTimeAuthorized Elapsed time since the first successful 802.1X authentication.
(Continues on the next page)