3 configuration example (3), 1 device configuration – Toshiba Magnia Z310 User Manual
Page 108
100
4.4.3 Configuration Example (3)
Establish the environment, based on the following scenario.
There are two parts, each with its own domain.
Each part is to have CA and RADIUS.
The station in Domain B can connect to an access point in Domain A.
The WEP key change and distribution is to occur every 10 minutes.
EAP-TLS is to be used for the authentication type.
No re-authentication is to occur before the WEP key distribution.
The WEP key is set to a 13-byte length.
4.4.3.1 Device configuration
The following is the device block diagram.
Domain A
CA-A
Domain B
RADIUS-A MAGNIA-SRV-A
STA-A
Router
Router
MAGNIA-SRV-B
CA-B
RADIUS-B
STA-B
(Connected to
MAGNIA-SRV-A)
STA-B
(Connected to
MAGNIA-SRV-B)
Windows 2000 Server is used as the OS.
Software
This product is used as the access point.
MAGNIA-SRV A
MAGNIA-SRV B
Hardware
TOSHIBA Wireless LAN Card (WEP
128bits)is used as a wireless LAN card.
RADIUS-A
RADIUS-B
Software
Anything that is prepared is used.
CA-A
CA-B
Software
Anything that is prepared is used.
Software
Windows XP is used as the OS.
STA-A
STA-B
Hardware
A wireless LAN card with WEP 128bits is
used.