Toshiba Magnia Z310 User Manual
Page 40
Item
Description
Specifies the name of the logical network configured by the
access point.
The same setting item is provided on the station that runs in
infrastructure mode. The same name as the access point to be
connected to must be specified in the setting item.
Characters
ASCII characters
ASCII characters include alphanumeric characters
and the following symbols:
!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~
Range
Up to 32 letters
Default MAGNIA
[Network Name (ESSID)]
edit box
Remarks
If its default is not changed, a third person may
connect to the access point by mistake. Please
change it.
See the following section, too.
[Appendix 2 Security]
Specifies whether to accept a connection request from a
network having a special "network name (ESSID)."
Checkbox
is selected
A station can be connected only
when the network name matches.
Selection
Checkbox
is cleared
A station having network name "ANY"
or a null character can be connected.
Default
Checkbox is cleared
[Don’t accept station with
network name "ANY"]
check box
Remarks
This item is enabled when [Toshiba Wireless LAN
Card (AP)] is selected in [Wireless LAN adapter].
See the following section, too.
[Appendix 2 Security]
(Continues on the next page)