Toshiba Magnia Z310 - Manual (Page 48)

Item Description
Displays the RADIUS servers' hostnames or IP addresses.
Specify whether to use the RADIUS server or not.
Four RADIUS servers can be setup for one rule.
Checkbox
is selected
It applies the rules to the RADIUS
server.
Selection
Checkbox
is cleared
It does not apply the rules to the
RADIUS server.
Default Checkbox is cleared.
The RADIUS servers' default names are
"RADIUS1", "RADIUS2", "RADIUS3" and
"RADIUS4".
Specify appropriate host names and IP
addresses.
[RADIUS Server]
list box
Remarks The access point sends inquiries in order to valid
RADIUS servers until the authentication succeeds
or fails.
Specifies the information about RADIUS server.
[RADIUS Setting-RADIUS] dialog box will appear.
[3.2.2.6 [RADIUS Setting - RADIUS] dialog box]
[Edit]
button
Remarks After editing the information the checkbox is
selected.
[Move Up][Move Down]
button
Changes the priority of the RADIUS servers to which the rules are
applied.
Priority is assigned in ascending order.
[OK]
button
Closes the dialog box and saves any changes you have made.
[Cancel]
button
Closes the dialog box without saving any changes you have
made.