Toshiba Magnia Z310 - Manual (Page 117)

110
6. Click the [OK] button.
In the following example, "Accept SNMP Packets from any Host" is selected.
When it is necessary to limit the hosts to receive SNMP, select "Accept SNMP Packets
from these hosts" and add host names.
[For Windows 2000 / Server 2003]
For information on installing the SNMP Extension Agent, see the following section.
[2.1.1.2 For installation in Windows 2000]
[2.1.1.3 For installation in Server 2003]
The following describes the settings to be made after the SNMP Extension Agent is installed.
1. Open [Management tool] on the Control Panel on the MAGNIA Software Access Point.
2. Open the [Service] icon.
3. Select [SNMP Service] from the service list and open its properties.