beautypg.com

Appendix 1 snmp settings, Community and access rights, Community – Toshiba Magnia Z310 User Manual

Page 115: Access rights

background image

108

Appendix 1 SNMP Settings

When you set up the Software Access Point from the remote PC, using the Access Point
Configuration Utility, the SNMP Extension Agent must be operating at the connected MAGNIA
(access point).

Community and Access Rights

The SNMP (Simple Network Management Protocol) is a protocol that manages network-
connected communications devices via the network.
The Access Point Configuration Utility uses this protocol and sets the software access point from
a remote computer.
SNMP prevents unauthorized access and incorporates "community" and "access rights" to
achieve security.

Community

SNMP has an SNMP manager (Access Point Configuration Utility) and an SNMP agent (MAGNIA)
that is managed. Community is a group for managing. This group has an SNMP manager and
SNMP agent. Since the group is recognized by its community name, a connection cannot be
established if the community name is wrong (regardless if both communities support SNMP).
Therefore, the Access Point Configuration Utility and MAGNIA (Access Point) must be set to the
same community name.

MAGNIA(AP)

MAGNIA(AP)

MAGNIA(AP)

MAGNIA(AP)

Community name:Toshiba1

Community name:Toshiba2

Access Point
Configuration Utility

Connectable

Access Point
Configuration Utility

Not connectable

Access Rights

To access the SNMP agent, using the same community name and having access rights are
required. To set the MAGNIA (Access Point), WRITE permission is required for MAGNIA (Access
Point).

This manual is related to the following products: