Toshiba Magnia Z310 - Manual (Page 61)

52
3.4.2 [Selection of Wired LAN Network Adapter] dialog box
When the Wired LAN Selection Utility is started, the following dialog box is displayed.
Select the wired LAN card that you want to connect to, and click the [OK] button. If you do not
want to connect to it, select "Not selected."
! [Selection of Wired LAN Network Adapter] dialog box
Item Description
Selects the wired LAN card that you want to connect to.
If you do not want to connect to the wired LAN card, select " Not
selected"
Default Selected during installation
Selection list box
Remarks If the cable is not connected to the wired LAN
card, "Network cable unplugged." is displayed
at the end of the item.
[OK] button Closes the dialog box and saves any changes you have made.
[Cancel] button Closes the dialog box without saving any changes you have
made.
When wired LAN card is selected
When a wired LAN card is selected, the protocol and service, bound to the wireless LAN card, are
forcibly released. At this point, only " TOSHIBA MAGNIA Software AP (Distribution System)" is
bound.
However, on Windows 2000 or Server 2003, NWLink protocol is being used, "NWLink NetBIOS",
"File and Printer Sharing for Microsoft Networks", and "Client for Microsoft Networks" are still
bound. Please leave the above-mentioned component as it is.
!Notice!
If the driver of the selected wired LAN card is running abnormally, communication between the
wireless LAN station and the PC on the wired LAN and between the wireless LAN station and
server (access point) is disabled.
In the case of Windows 2000 or Server 2003, note that unless the network cable is connected, the
driver becomes invalid.
When "Not selected" is selected
If "Not selected" is selected, TOSHIBA MAGNIA Software AP (Distribution System) is forcibly
removed from all wired LAN cards.
If "Not selected" is selected from where the wired LAN card is selected, only TOSHIBA MAGNIA
Software AP (Distribution System) is bound to the wireless LAN card. Manually bind necessary
protocols and services. For information on the binding, refer to the manual or online Help of the