Konica Minolta bizhub C200 - Manual (Page 99)

C200 3-4
Assistant tool for C200 3
3.1.5 Specifying settings
Assistant tool for C200 has a User mode, which can be used by any user, and an Administrator mode, which
is used by the machine administrator.
The settings that can be specified differ for each mode.
User mode
User mode can be used by the general user. The User mode page appears when the machine is accessed
with Assistant tool for C200.
Settings can be specified for the following in User mode.
2
Note
For details on registering one-touch dial destinations, refer to the User’s Guide [Network
Scan/Fax/Network Fax Operations].
For details on the settings that can be specified in User mode, refer to "User mode" on page 3-8 .
Administrator mode
Administrator mode is used by the machine administrator. In order to log on to Administrator mode, the
administrator password must be entered.
Settings can be specified for the following in Administrator mode.
Tabs Parameter Description
System Summary The machine system configuration and the status of installed options are
displayed as device information.
Detail Information on the paper trays, output trays, interface and consumables
is displayed.
Meter Count Counter information, such as the number of pages copied, printed and
scanned, is displayed.
Online Assistance The contact information for this machine and for consumables is dis-
played.
Job Job List A list of print jobs that have been performed or are being performed, a list
of jobs sent from this machine and a list of jobs received by this machine
are displayed.
Print Default Settings Information on general settings, PCL settings and PS settings is dis-
played.
Fax/Scan One-Touch Key Registra-
tion Fax/scan operation settings for each communication mode can be reg-
istered with one-touch dial buttons.
Fax Program Registration Fax programs can be registered with one-touch dial buttons. Scan set-
tings and multiple destinations can be registered with the fax programs.
Domain Name Registration Strings of characters can be specified so they can easily be entered.
Tabs Parameter Description
System System Settings Basic system settings, such as the measurement units and paper trays,
can be specified.
Display Settings Default operation screens can be specified.
Copier Settings Settings for copy operations can be specified.
Administrator Settings The e-mail address where activity reports are sent can be specified.
Account Track Registration Account registration settings can be specified.
Online Assistance Contact information can be specified.
Print Local I/F The length of time until the local interface times out can be specified.
Default Settings Settings for the page description language (PDL) and for PCL printing
and PS printing can be specified.