Konica Minolta bizhub C200 - Manual (Page 69)

C200 2-20
Specifying machine functions (software switch settings) 2
2.5 Scanning/faxing settings
The software switch settings related to scanning/faxing are described below.
2
Note
For details on the Fax/Scan mode operations, refer to the User’s Guide [Network Scan/Fax/Network
Fax Operations].
2.5.1 Specifying settings concerning the position of the transmission source information
and concerning password communications (mode 000)
Specify settings concerning the position of the transmission source information and concerning password
communications.
Factory settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
2
Note
The default settings for bit 4 are shown below.
North American model: 1
European model: 0
2.5.2 Specifying settings for inserting the destination in the original (mode 001)
Specify how the recipient name is added to original.
Factory settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
Bits 7654 3210
Setting (North American model) 0011 0000 (HEX: 30)
Setting (European model) 0010 0000 (HEX: 20)
Bits Description Settings Details
7-5 − 001 *Do not change the settings
for these bits.
4 Specify where the transmission source name is added to a
transmitted original. 0 Outside of the original
1 Inside the original
3 Specify whether to return to the setting for comparing or not
comparing the transmission password when an operation is
finished. 0 Not compared
1 Compared
2 Specify whether or not to compare the transmission pass-
word. 0 Not compared
1 Compared
1-0 - 00 * Do not change the settings
for these bits.
Bits 7654 3210
Settings 0000 0000 (HEX: 00)
Bits Description Settings Details
7-1 − 0000000 *Do not change the settings
for these bits.