Konica Minolta bizhub C200 - Manual (Page 93)

C200 2-44
Specifying machine functions (software switch settings) 2
2.7 Copying settings
The software switch settings related to copying are described below.
2
Note
For details on Copy mode operations, refer to User’s Guide [Copy Operations].
2.7.1 Specifying settings for the main application (mode 402)
Specify whether the machine will be used mainly with Copy mode operations or printing operations.
Factory settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
2.7.2 Specifying settings for using Copy mode operations (mode 403)
Specify whether or not to allow the use of Copy mode operations.
Factory settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
Bits 7654 3210
Settings 0000 0100 (HEX: 04)
Bits Description Settings Details
7-3 − 00000 *Do not change the settings
for these bits.
2 Specify whether the machine will be used mainly with Copy
mode operations or printing operations. 0 Copy mode (After all com-
puter printing data is re-
ceived, it is printed
altogether.)
1 Computer printing (Compu-
ter printing data is printed as
it is received.)
1-0 − 00 *Do not change the settings
for these bits.
Bits 7654 3210
Settings 0000 0000 (HEX: 00)
Bits Description Settings Details
7-1 − 0000000 *Do not change the settings
for these bits.
0 Specify whether or not to allow the use of Copy mode oper-
ations. 0 Permitted
1 Not permitted