Konica Minolta bizhub C200 - Manual (Page 148)

C200 3-53
Assistant tool for C200 3
2
Note
The address can be specified as a host name if "DNS Settings" in the Common Setting - TCP/IP page
is set to "ON" and a DNS server is registered.
2
Reminder
In order to apply changes to the settings for parameters marked with , the machine must be restarted
(turn it off, then on again).
When the machine is turned off, then on again, turn the machine off with the sub power switch before
turning off the main power switch. In addition, wait at least 10 seconds to turn the machine on after
turning it off; otherwise, the machine may not operate correctly.
SMTP TX Settings
Specify the settings for SMTP transmission.
POP3 Password Type in the password.
Range: Up to 32 characters
Characters that can be entered: Alphanumeric characters and symbols (space ! " # $ % & ' ~
= ¥ | ; : + * ` / ? ^ @ _ - . , ( ) [ ] { } < >)
Retype POP3 Pass-
word For confirmation, type in the password again.
Range: Up to 32 characters
Characters that can be entered: Alphanumeric characters and symbols (space ! " # $ % & ' ~
= ¥ | ; : + * ` / ? ^ @ _ - . , ( ) [ ] { } < >)
Auto-RX Check Select whether or not to automatically connect to the POP3 server and check for received In-
ternet faxes.
Auto-RX Check In-
terval Type in the time interval for automatically checking for received faxes. (Range: 1 to 99 minutes)
Port Number Type in the port number for the POP3 server. (Range: 1 to 65535)
POP3 Timeout Specify the length of time until communication with the POP3 server times out.
APOP Authentica-
tion Select whether or not APOP authentication is used.
Item Description
Item Description
SMTP Server Address Select the method (IP address/host name) for specifying the serv-
er address, and then type in the address of the SMTP server.
IP address format: ***.***.***.***; Range for ***: 0 to 255
Host name range: Up to 64 characters
Characters that can be entered: Alphanumeric characters and
symbols (! # $ % & ' * + - . / = ? _ ` { | } ~ @)
Port Number Type in the port number for the SMTP server. (Range: 1 to 65535)
SMTP TX Timeout Specify the length of time until communication with the SMTP
server times out.