Konica Minolta bizhub C200 - Manual (Page 47)

C200 1-36
Specifying network settings 1
7
Touch [New Password], type in the SMTP authentication password, and then touch [OK].
8
Touch [Confirm New Password], type in the SMTP authentication password again, and then touch [OK].
9
Touch [OK] in each screen until the initial screen appears.
!
Detail
In order to specify SMTP authentication settings, the software switch settings must be specified. For
details, refer to
"Specifying security settings for e-mail transmissions (mode 380)" on page 2-14 .
If SMTP authentication settings for SMTP reception have been specified on the relay station for the IP
relay operation, SMTP authentication settings must be specified on the machine sending the fax when
the relay station is registered.
1.3.12 RAW Port Number Settings
Parameters
Specifying the settings
1
In the Network Settings screen, touch [RAW Port Number Settings].
2
To change the port number, type in the port number, and then touch [OK].
– To return to the default setting, touch [Default].
Parameter Description
RAW Port Number Set-
tings The RAW port number can be changed.