Konica Minolta bizhub C200 - Manual (Page 76)

C200 2-27
Specifying machine functions (software switch settings) 2
2.5.10 Specifying settings for fax reception functions (mode 030)
Specify whether or not rotation or 2in1 printing is used with received faxes.
Factory settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
2
Note
The default settings for bit 0 are shown below.
North American model: 1
European model: 0
2.5.11 Specifying the settings for selecting paper trays when faxes are received (Mode
037)
Specify the paper tray that is selected when a fax is received.
Factory settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
Bits 7654 3210
Setting (North American model) 1101 0001 (HEX: D1)
Setting (European model) 1101 0000 (HEX: D0)
Bits Description Settings Details
7 − 1 *Do not change the setting
for this bit.
6 Specify whether or not rotation printing is used with received
faxes. 0 Is not rotated
1 Is rotated
5 − 0 *Do not change the setting
for this bit.
4 Specify whether or not 2in1 printing is used with received
faxes. 0 2in1 printing is not used
1 2in1 printing is used
3-1 − 000 *Do not change the settings
for these bits.
0 − 0 *Do not change the settings
for these bits.
1
Bits 7654 3210
Settings 1111 1000 (HEX: F8)
Bits Description Settings Details
7 Specify whether or not tray 1 can be selected when printing
received faxes. 0 Cannot be selected
1 Can be selected
6 Specify whether or not tray 2 can be selected when printing
received faxes. 0 Cannot be selected
1 Can be selected
5 Specify whether or not tray 3 can be selected when printing
received faxes. 0 Cannot be selected
1 Can be selected
4 Specify whether or not tray 4 can be selected when printing
received faxes. 0 Cannot be selected
1 Can be selected