Konica Minolta bizhub C200 - Manual (Page 77)

C200 2-28
Specifying machine functions (software switch settings) 2
2
Note
Bits 6, 5 and 4 are available only if optional paper feed cabinets have been installed.
Bit 2 is available only if the optional bypass tray has been installed.
2
Reminder
Bits 7, 6, 5, 4 and 2 cannot all be set to "0".
2.5.12 Specifying settings for general subscriber lines (mode 043)
Specify the calling method for the general subscriber line.
Factory settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
2
Note
Bit 1 is available only if the optional fax multi line kit has been installed.
3 − 1 *Do not change the setting
for this bit.
2 Specify whether or not the bypass tray can be selected when
printing received faxes. 0 Cannot be selected
1 Can be selected
1-0 − 00 *Do not change the settings
for these bits.
Bits Description Settings Details
Bits 7654 3210
Settings 1000 0011 (HEX: 83)
Bits Description Settings Details
7-2 − 100000 *Do not change the settings
for these bits.
1 Specify the calling method for the general subscriber line. 0 Calls from the specified line
(port 1 or 2), based on the
operation and registration
settings.
1 Calls from the available line
(port 1 or 2), regardless of
the operation and registra-
tion settings.
0 − 1 *Do not change the setting
for this bit.