Factory settings, Specifying the settings, Tails, refer to – Konica Minolta bizhub C200 User Manual
Page 64: P. 2-15
C200
2-15
Specifying machine functions (software switch settings)
2
SMTP authentication is enabled when the following conditions are met.
-
Bit 6 of mode 380 is set to "1".
-
When the SMTP authentication user name and password are shared with the POP3 user name and
password, bit 2 of mode 380 is set to "0".
-
When the SMTP authentication user name and password are not shared with the POP3 user name and
password, bit 2 of mode 380 is set to "1", and settings for "SMTP Authentication User Name" and
"SMTP Authentication Password" in the Network Settings screen are specified.
-
Bit 5, 4 or 3 of mode 380 is set to "1".
!
Detail
For details on specifying SMTP authentication settings for e-mail transmissions, refer to
If all e-mail authentication methods are enabled (bits 5, 4 and 3 of mode 380 are set to "1"), they will
have the following priority: CRAM-MD5 authentication (bit 5)
→ LOGIN authentication (bit 4) → PLAIN
authentication (bit 3).
2.4.12
Specifying security settings for e-mail receptions (mode 383)
Specify the security settings for e-mail receptions.
Factory settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
3
Specify whether or not mail transmission authentication
(PLAIN authentication) is used.
0
Not used
1
Used
2
Specify whether or not the SMTP authentication ID and
password are shared with the POP3 user name and pass-
word.
0
The ID and password are
shared.
1
The ID and password are
not shared.
1
Specify whether or not the HTTP server protocol is used.
0
Not used
1
Used
0
Specify whether or not the SSL protocol is used.
0
Not used
1
Used
Bits
Description
Settings
Details
Bits
7654 3210
Settings
0011 1000 (HEX: 38)
Bits
Description
Settings
Details
7
−
0
*Do not change the setting
for this bit.
6
Specify whether or not mail reception authentication (SMTP
authentication) is used.
0
Not used
1
Used
5
Specify whether or not mail reception authentication (CRAM-
MD5 authentication) is used.
0
Not used
1
Used
4
Specify whether or not mail reception authentication (LOGIN
authentication) is used.
0
Not used
1
Used
3
Specify whether or not mail reception authentication (PLAIN
authentication) is used.
0
Not used
1
Used
2-0
−
000
*Do not change the settings
for these bits.