Konica Minolta bizhub C200 - Manual (Page 60)

C200 2-11
Specifying machine functions (software switch settings) 2
2.4.4 Specifying settings concerning Assistant tool for C200, SMTP
transmission/reception and POP3 reception (mode 361)
Specify settings concerning Assistant tool for C200, SMTP transmission/reception and POP3 reception.
Factory settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
2.4.5 Specifying the setting for the POP Before SMTP time (mode 364)
Specify the time until a connection with the SMTP server after checking for new transmissions (POP3) during
an e-mail reception.
Factory settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
Bits 7654 3210
Settings 1111 1000 (HEX: F8)
Bits Description Settings Details
7 Specify whether or not Assistant tool for C200 is used. 0 Not used
1 Used
6 − 1 *Do not change the setting
for this bit.
5 Specify whether or not SMTP transmission is used. 0 Not used
1 Used
4 Specify whether or not SMTP reception is used. 0 Not used
1 Used
3 Specify whether or not POP3 reception is used. 0 Not used
1 Used
2-0 − 000 *Do not change the settings
for these bits.
Bits 7654 3210
Settings 0000 0101 (HEX: 05)
Bits Description Settings Details
7-6 − 00 *Do not change the settings
for these bits.
5-0 Specify the time until a connection with the SMTP server af-
ter checking for new transmissions (POP3) during an e-mail
reception. 000000 None
000001 1 second
000010 2 seconds
000011 3 seconds
000100 4 seconds
000101 5 seconds
.
.
.
111100 60 seconds