Panasonic HX-A100D - Manual (Page 13)

13 HD Writer WE
Preparation
Connect the unit to your computer
Tips
●
For further details, also refer to the Operating Instructions of the unit.
● To record to SD cards, use an SD card reader/writer. Before recording
on an SD card, fully charge the battery of the unit.
● When using an SDXC card in a Windows ® operating system, the
computer may display a message asking whether to format the card.
Be careful because if you format the card, you will delete all your
precious videos. Be sure to check the following page before using an
SDXC card.
http://panasonic.net/avc/sdcard/information/sdxc.html
●
Do not operate the unit or disconnect the USB cable during the
transfer of data in the unit. The software may malfunction, and data
may be lost.
● When connecting the unit to the computer for the first time,
processing may take some time as the OS installs the driver.
●
If the unit is not recognized after it is connected, try connecting it to
a different USB connector, such as the USB connector on the rear of
the computer.
SD card connection
When using an SD card reader/writer, connect the device before
starting this software. (For connection instructions, refer to the
Operating Instructions of the computer or SD card.)
Disconnecting the unit from the computer
1
Confirm that the unit is not recording or
being accessed in any way.
2
Click or in the task tray.
Example of the
task tray icon
3
Safely remove the unit by selecting it
from the menu.
If multiple USB devices are displayed, determine which one is
the unit, for example by selecting the drive letter assigned to
the unit.
4
Disconnect the USB cable from the
computer.
5
Turn off the unit.