beautypg.com

Wi-fi direct, Wi-fi, Direct – Samsung SM-N900PZKESPR User Manual

Page 159

background image

Passpoint: When turned On, your phone will connect to passpoint-enabled Wi-Fi

networks automatically.

Sort by: Choose how scanned Wi-Fi networks are presented on the Wi-Fi

settings screen.

Keep Wi-Fi on during sleep: Specify when to switch from Wi-Fi to mobile data

for data communications, when the device goes to sleep (when the backlight

goes out). This setting can affect data usage, and the behavior of devices you

connect to your device, such as when using it as a hotspot.

Always allow scanning: When enabled, Google location service and other apps

will scan for networks, even when Wi-Fi is turned Off.

Auto network switch: When enabled, your phone can automatically switch

between Wi-Fi networks and mobile networks.

Wi-Fi timer: When turned On, your phone will automatically connect or

disconnect from a Wi-Fi network, using the Starting time and Ending times you

set.

Install certificates: If you have certificates stored on an installed optional

memory card (not included), you can use this option to install the certificates.

MAC address: (Not configurable) View your device’s MAC address, needed for

connecting to some secured networks.

IP address: (Not configurable) View your device’s IP address.

WPS push button: Set up a connection to a WPS (Wi-Fi Protected Setup) router or

other equipment.

WPS PIN entry: (Not configurable) View the PIN used by your device to set up a

PIN-secured connection to a Wi-Fi router or other equipment.

Help: Learn about setting up and using Wi-Fi networks, and other settings.

Wi-Fi Direct

Wi-Fi Direct allows devices to connect to each other directly via Wi-Fi, without a Wi-Fi network

or hotspot, and without having to set up the connection. For example, your device can use Wi-Fi

Direct to share photos, contacts and other content with other Wi-Fi Direct devices.

1. Press

and tap

> Settings > Connections.

2. Tap Wi-Fi, and then tap the ON/OFF switch beside Wi-Fi to turn Wi-Fi On. Wi-Fi must

be On to configure Wi-Fi Direct settings.

Settings

146

This manual is related to the following products: