Samsung SM-G900PZWASPR - Manual (Page 15)

● Always keep the USB/Accessory Port cover clean and be careful to avoid damaging it.
Note
: The touch screen may not be active in water.
Charge the Battery
1. On the bottom of the phone, gently lift the multipurpose jack cover to reveal the USB
Charger/Accessory Port.
2. Plug the USB cable into the Charger/Accessory Port on the bottom of the phone.
3. Plug the other end of the USB cable into the Charging Head, and then plug the Charging Head
into an electrical outlet to charge your battery. Fully charging a battery may take up to three
hours.
Note:
Your phone supports USB 3.0 and USB 2.0, and includes a USB 3.0 cable for higher data transfer
speeds when connected to another USB 3.0 device. You can also use USB 2.0 cables (not included) to
charge and connect your phone.
Activate Your Phone
Follow the instructions below to activate your phone if it has not already been activated. Depending on
your account or how and where you purchased your phone, it may be ready to use or you may need to
activate it on your Sprint account.
● If you purchased your phone at a Sprint Store, it is probably activated and ready to use.
● If you received your phone in the mail and it is for a new Sprint account or a new line of service, it
is designed to activate automatically.
Get Started 3