Avaya C460 - Manual (Page 97)

Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 85
Example:
set dot1x re-authperiod
User level: supervisor
Use the set dot1x re-authperiod command to set the idle time between re-
authentication attempts.
The syntax for this command is:
set dot1x re-authperiod
Example:
set dot1x server-timeout
User level: supervisor
Use the set dot1x server-timeout command to set the server retransmission
timeout period for all ports. This is the maximum time that the port will wait for a
reply from the Authentication Server.
The syntax for this command is:
set dot1x server-timeout
Example:
set dot1x supp-timeout
User level: supervisor
Use the set dot1x supp-timeout command to set the maximum time that the
switch will wait for a reply from the Authenticated Station before the session is
terminated.
C460-1(super)# set dot1x quiet-period 90
Done!
Seconds Idle time in seconds ( 0 to 65535)
C460-1(super)# set dot1x re-authperiod 90
Done!
Seconds Timeout in seconds (0 to 65535)
C460-1(super)# set dot1x server-timeout 90