Avaya C460 - Manual (Page 89)

Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 77
Example:
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
rmon2 protocol-dir
User level: privileged, supervisor.
L If you are at the ”privileged” level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter configure mode if necessary.
Use the rmon2 protocol-dir to add a protocol to the protocol directory.
Use the no rmon protocol-dir command to remove a protocol from the
protocol directory.
The syntax for this command is:
rmon2 protocol-dir UDP|TCP [ []]
Example:
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
rmon2 protocol-dist
User level: privileged, supervisor.
L If you are at the ”privileged” level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter configure mode if necessary.
Use the rmon2 protocol-dist to enable the RMON2 Protocol Distribution
owner name The owner name string.
C460-1# rmon history 1026 1026 3/2 30 buckets 20 owner amir
history 1026 was created successfully
Router-1# rmon2 protocol-dir UDP 345
Router-1# rmon2 protocol-dir UDP 345 "my description"
Router-1# rmon2 protocol-dir UDP 345 "description" "I am
the owner"
Done!