Avaya C460 - Manual (Page 113)

Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 101
set port disable
User level: read-write, admin.
Use the set port disable command to disable a port or range of ports.
The syntax for this command is:
set port disable [module>/
Example:
set port dot1x initialize
User level: admin.
Use the set port dot1x initialize command to initialize port dot1x.
The syntax for this command is:
set port dot1x initialize
Example:
module Number of the module (3-6). If you do not specify a number,
the ports on all the modules are shown.
port Number of the port on the module. If you do not specify a
number, all the ports on the module are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on module 4.
C460-1# set port disable 4/1
Port 4/1 disabled.
module/
port Module and port number.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on module 4.
C460-1(super)# set port dot1x initialize 2/3
port 1/2 dot1x was initialized