Avaya C460 - Manual (Page 221)

Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 209
show running-config
User level: read-only, read-write, admin.
Use the show running-config command to display the current router configuration
information.
The syntax for this command is:
show running-config
Example:
Router-1> show running-config
Router-1>
! Avaya Inc.- C460ML Multi-layer Switch - Router configuration
! version 2.0.2
ip access-list-name 100 "list #100"
ip access-list-owner 100 "[email protected]"
ip access-list 100 1 permit ip any any
ip access-list 100 2 fwd3 udp any eq 68 any eq 67
!
set vlan 2 name "vlan2"
no rmon2 protocol-dir TCP 20
no rmon2 protocol-dir TCP 23
no rmon2 protocol-dir TCP 25
no rmon2 protocol-dir TCP 80
no rmon2 protocol-dir TCP 110
no rmon2 protocol-dir UDP 161
no rmon2 protocol-dir UDP 162
rmon2 protocol-dir TCP 1111 "1111--TCP"
rmon2 protocol-dir TCP 2222 "2222--TCP"
!
interface "11"
ip vlan name "Default"
ip address 11.11.11.1 255.255.255.0
!
--type q to quit or space key to continue--
interface "12"
ip vlan name "vlan2"
ip address 12.12.12.1 255.255.255.0
!
interface "78"
ip vlan name "Default"
ip address 149.49.78.71 255.255.255.0
!
ip default-gateway 149.49.78.1 1 low