Avaya C460 - Manual (Page 27)

Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 15
The syntax for this command is:
[no] arp timeout
Example:
To set the arp timeout to one hour:
To restore the default arp timeout:
banner login
Use the banner login command to enter the login banner configuration mode.
Use the no banner login command to set the login banner to the default value.
L Delete the current banner using the no banner login command before
creating a new banner, .
The syntax for this command is:
[no] banner login
Example:
banner login line
See “line”
banner post-login
Use the banner post-login command to enter the post-login configuration
mode.
Use the no banner post-login command to set the post-login banner to the
default value.
L Before creating a new banner, delete the current banner using the no banner
post-login command.
seconds The amount of time, in seconds, that an entry remains
in the arp cache.
C460-1(configure)# arp timeout 3600
C460-1(configure)# no arp timeout
C460-1(super)# banner login
C460-1(super)#