Avaya C460 - Manual (Page 28)

Chapter 2 Avaya C460 CLI Commands
16 Avaya C460 Reference Guide
The syntax for this command is:
[no] banner post-login
Example:
banner post-login line
See “line”
clear arp-cache
User level: read-write, admin.
L If you are at the “read-write” user level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter configure mode.
Use the clear arp-cache command to delete dynamic entries from the ARP
cache and the IP route cache.
The syntax for this command is:
clear arp cache [|[]]
Example:
C460-1(super)# banner post-login
C460-1(super)#
vlan VLAN string (up to 16 characters
ip addr IP address
mask IP mask
C460-1(configure)# clear arp-cache
Flushing all arp entries
Flushed 100 ARP entries
Done!