Avaya C460 - Manual (Page 147)

Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 135
set system location
User level: read-only, read-write, admin.
Use the set system location command to set the mib2 system location MIB
variable
The syntax for this command is:
set system location [string]
Example:
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
set system name
User level: read-write, admin.
Use the set system name command to set the mib2 system name MIB variable.
The syntax for this command is:
set system name [string]
Example:
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
string • The location name string should be typed inside inverted
commas.
• The location is cleared if you leave this field blank.
C460-1# set system location “tech-support”
*** Set system location ***
system location set
string • The system name string should be typed inside inverted
commas.
• The name is cleared if you leave this field blank.
C460-1# set system name “C460-1”
*** Set system name ***
system name set