Avaya C460 - Manual (Page 211)

Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 199
Example to show PoE configuration on I/O module 3:
Output fields:
show powerinline budget
User level: read-only, read-write, admin.
Use the show powerinline budget command to display the PoE budget
distribution for modules in the switch. The budget assigned for the module includes
power for PoE ports and power required for module basic PoE operation.
port
(optional) Number of the port on the module. If you do not specify a
number, all the ports on the module are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on module 4.
C460-1> show powerinline 3
Port Inline Powering
Operational Priority
Status
------ ------------------ ---------
3/1 Fault Low
3/2 Fault Low
3/3 Fault Low
3/4 Searching Low
3/5 Searching Low
3/6 Searching Low
3/7 Searching Low
Field Description
Inline operational
status • Disabled – Detection process in administratively
disabled
• Searching – No PD connected
• Delivering power – Valid PD connected and
power delivered on the port
• Fault – Invalid PD connected
Powering Priority • Critical
• High
• Low