Avaya C460 - Manual (Page 53)

Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 41
Example:
ip access-list-dscp precedence
User level: read-write, admin.
L If you are at the ”read-write” user level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter configure mode if necessary.
Use the ip access-list-dscp precedence command to ?
The syntax for this command is:
ip access-list-dscp precedence
policy-
list-
number A valid id number for a policy list currently defined for the module
(100 - 149)
dscp Range of dscp. For example:
• 0 to 63
• - -: apply the
map to all packets with DSCP from to .
action • permit: do nothing, let the packet pass:
• deny: drop the packet
• deny-and-notify: drop the packet and send an SNMP trap
• fwd0, fwd1fwd7: Set the frame COS field to 0,7
C460-1(configure)# ip access-list-dscp operation 101 0-63
permit
C460-1(configure)# ip access-list-dscp operation 101 62
fwd5
policy-list-
number A valid id number for a policy list currently defined for the
module (100 to 149)
dscp DSCP entry (0 to 63)
precedence ????
mandatory
optional