Avaya C460 - Manual (Page 115)

Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 103
set port dot1x quiet-period
User level: admin.
Use the set port dot1x quiet-period command to set the 802.1x quiet period
per port.
The syntax for this command is:
set port dot1x quiet-period
Example:
set port dot1x re-authenticate
User level: admin.
Use the set port dot1x re-authenticate command to set the port to re-
authenticate.
The syntax for this command is:
set port dot1x re-authenticate
Example:
set port dot1x re-authentication
User level: admin.
Use the set port dot1x re-authentication command to set the re-
authentication mode per port.
module/
port Module and port number.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on module 4.
seconds Quiet period in seconds – 0 to 65535
C460-1(super)# set port dot1x quiet-period 4/2 300
module/
port Module and port number.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on module 4.
C460-1(super)# set port dot1x re-authenticate 1/2
port 1/2 is not in authenticating process