Avaya C460 - Manual (Page 170)

Chapter 2 Avaya C460 CLI Commands
158 Avaya C460 Reference Guide
Example:
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
show ip icmp
User level: read-only, read-write, admin.
Use the show icmp ip command to display the status of ICMP error messages.
The syntax for this command is:
show ip icmp
Example:
vlan VLAN NAME (string up to 16 chars) or VLAN ID (number)
ip-addr The IP address of the station(s)
ip-mask The ip mask of the routes.
static Display static ip ARP information.
show ip arp Display all ARP mapping
show ip arp marketing Display interface ARP mapping
show ip arp 192.168.49.1 Display one host ARP mapping
show ip arp 192.168.49.1 255.255.255.0 Display range of ARP mapping
show ip arp marketing_vlan Display vlan ARP mapping
show ip arp static Display static ARP mapping
Router-1> show ip icmp
ICMP error messages status is ENABLE