Avaya C460 - Manual (Page 214)

Chapter 2 Avaya C460 CLI Commands
202 Avaya C460 Reference Guide
show radius authentication
User level: read-only, read-write, admin.
Use the show radius authentication command to display all RADIUS
authentication configurations.
The syntax for this command is:
show radius authentication
Example:
show rmon alarm
User level: read-only, read-write, admin.
Use the show rmon alarm command to display the parameters set for a specific
alarm entry that was set using the rmon alarm command on Page 75 or using the
C460 Manager.
The syntax for this command is:
show rmon alarm []
C460-1> show radius authentication
RADIUS authentication parameters:
---------------------------------
Mode: Enabled
Primary-server: 192.168.42.252
Secondary-server: 192.168.48.134
Retry-number: 4
Retry-time: 5
UDP-port: 1645
Shared-secret: sodot
Alarm Index History index defined using rmon alarm command or the
C460 Manager.