Aastra Telecom AastraLink Pro 160 - Manual (Page 289)

41-001190-02 Rev. 01, Rel. 1.2 7-1
Chapter 7
Troubleshooting Solutions
About this Chapter
Introduction
This chapter contains several trouble-shooting solutions for the AastraLink Pro
160. It describes how to interpret the LED status indicator located on the
AastraLink front panel. It also describes how to reboot the AastraLink using either
the Web UI, or the reset switch. In addition, it describes how to use the reset
switch to restore original factory default settings on the device, in order to return it
to an out-of-the-box state.
This chapter also describes how to use the AastraLink Recovery Mode UI to
reinstall system software (that is, reprogram the CompactFlash card and/or the
Onboard flash.) if it is ever required.
Topics
This chapter covers the following topics:
Topic Page
Monitoring the AastraLink Status LED page 7-3
Rebooting the AastraLink page 7-5
Rebooting Using the Web UI page 7-5
Rebooting Using the Reset Switch (Hard Reboot) page 7-6
Rebooting Using the Web UI page 7-5
Restoring AastraLink Factory Default Settings page 7-7
What Happens if I Restore Factory Default Settings? page 7-7