Aastra Telecom AastraLink Pro 160 - Manual (Page 161)

Configuring Dial Plan Settings
41-001190-02 Rev. 01, Rel. 1.2 4-51
Configuring AastraLink Pro 160 System and Network Parameters
If you have added a Paging Group to the AastraLink Pro, use the following
procedure to configure Paging and Intercom options if required. This procedures
assumes a Paging Group has already been added to the AastraLink Pro.
AastraLink Web UI
Step Action
Paging and Intercom options for Paging Groups
1 After adding a Paging Group using the procedure in Chapter 3, the section, “Adding a Group” on
page 3-49 , select Configuration->Dial Plan->Settings.
Paging and Icom
Options