Aastra Telecom AastraLink Pro 160 - Manual (Page 239)

Configuring Auto-Attendant
41-001190-02 Rev. 01, Rel. 1.2 4-129
Configuring AastraLink Pro 160 System and Network Parameters
Use the following procedure to specify the Auto-Attendant schedule.
AastraLink Web UI
Step Action
1 Select Configuration->Auto-Attendant->Schedule
2 To begin editing the Auto-Attendant schedule, click on one of the days of the week.
For example, click
3 Set the “Day” field to the day of the week you are configuring.
4 If the office is closed this day, then in the “Closed” field, place a check mark in the box and click
. You disable the “Closed” field by unchecking the box.
5 If the office is open this day, do the following (“Closed” field must be unchecked):
• Set the “Open At” field to the correct time when the office opens, and set AM or PM as
appropriate.
• Set the “Close At” field to the correct time when the office closes, and set AM or PM as
appropriate.
6 Click to save your changes.