Aastra Telecom AastraLink Pro 160 - Manual (Page 116)

Configuring System Settings
4-6 41-001190-02 Rev. 01, Rel. 1.2
AastraLink Pro 160 Administrator Guide
Specifying Regional Settings
Use the following procedure to specify regional settings for your AastraLink Pro
160.
AastraLink Web UI
Step Action
1 Select Configuration->System Settings->Regional Settings.
2 Set to the country where you installed the AastraLink Pro 160. Default is None. Valid
values are:
• None (default)
• Canada
• United States
• Mexico
Notes:
1.
The use of “None“ is not supported. A valid country must be set during initial greenfield
configuration.
2.
If you change the country setting for this parameter, the FXO Auto-Tuning feature must be
initiated to reset the auto-tuning on the FXO ports to the new country.