Aastra Telecom AastraLink Pro 160 - Manual (Page 128)

Configuring System Settings
4-18 41-001190-02 Rev. 01, Rel. 1.2
AastraLink Pro 160 Administrator Guide
Use the following procedure to run the FXO Auto-Tuning Wizard to
automatically adjust the audio on the AastraLink Pro, or set the FXO tuning
parameters manully if required to adjust audio.
AastraLink Web UI
Step Action
1 Select Configuration->FXO Tuning..
To run the FXO Auto-Tuning Wizard:
2 Click the button.
The Tuning Wizard automatically adjusts the FXO line hybrid parameters for best balance with your
telephone network lines. This process may take up to 15 minutes to complete, but usually less.
Note: You can cancel the Automatic Tuning Wizard any time by clicking the <Abort> button during
the tuning process. The parameters remain unchanged if you Abort the Automatic Tuning Wizard