Aastra Telecom AastraLink Pro 160 - Manual (Page 216)

Configuring VoIP Settings
4-106 41-001190-02 Rev. 01, Rel. 1.2
AastraLink Pro 160 Administrator Guide
14 Reboot the MBU at the prompt.
The MBU reboots and downloads its configuration and all registered handsets to the AastraLink. The
VOIP LED on the MBU lights up solid when SIP is correctly registered. This may take several
minutes.
Once the MBU is registered on the AastraLink Pro, you can access the MBU UI by clicking on
Configuration->VoIP->Mobiliby Base Units, click on a MAC address of an MBU that is registered,
and enter the Admin User ID and Password. The MBU UI displays for that MBU. All registered
handsets also display.
Note: Registered handsets display a virtual MAC address that was allocated by the AastraLink Pro.
For more information about the virtual MAC addresses for DECT 420d handsets, see Chapter 3, the
section,
“Uploading User Lists if MBU 400s Connected to the AastraLink Pro” on page 3-37 .
AastraLink Web UI
Step Action