Horner APG QX351 OCS HEQX351C103 - Manual (Page 95)

MAN0892-03-EN CH.15
February 25, 2010 Page 95 of 109 #1039
CHAPTER 15: CLONE UNIT
15.1 Overview
‘Clone Unit’ feature allows the user to “clone” the OCS of the exact same model. This feature “clones”
application program and unit settings stored in Battery backed RAM of an OCS into the RM (refer
Removable Media
Chapter 8 for details on using RM). It can then be used to clone a different OCS (exact
same model).
This feature can be used for:
•
Replacing an OCS by another unit of the same model.
•
Duplicating or “clone” units without a PC.
15.2 Clone
User needs to perform the following to Clone:
1. The ‘Clone Unit’ can be accessed by going to the ‘System Menu’ of the OCS. A new menu “Clone
Unit” has been added at the end of the main system menu as shown below:
Figure 15.1: System Menu
2. Selecting “Clone Unit” menu will open the following menu screen:
Figure 15.2: Clone Unit Menu before Cloning
Note: Free/Total – displays number of free and total bytes in Removable Media.