Horner APG QX351 OCS HEQX351C103 - Manual (Page 42)

CH.9 MAN0892-03-EN
February 25, 2010 Page 42 of 109 # 1039
Figure 9.7: I/O Map & Module Setup Tabs
a.
I/O Map Tab
The I/O Map describes the I/O registers assigned to a specific I/O module. Although there are no user-
defined parameters, the I/O Map can be viewed after the SmartStack module is configured to review the
registers.
•
Model number provides the part number.
•
Description Describes the number of input and output channels and other key
Characteristics of the module.
•
Type: Displays the register types assigned to the module.
•
Starting Location: Denotes the starting location of the register type.
•
Ending Location: Denotes the ending location of the register type.
•
Number: Indicates the number of a particular register type.
Note: Do not confuse the described number of input and output channels with the numbers found in the
Type column (i.e., %I and %Q). The numbers do not necessarily match.
b.
Module Setup
Module Setup for the I/O Selected in the above example (DIQ611) shows the output state on the
controller.