Horner APG QX351 OCS HEQX351C103 - Manual (Page 76)

CH. 13 MAN0892-03-EN
February 25, 2010 Page 76 of 109 # 1039
13.3
Establishing Communications
The preferred method of communicating between Cscape and a QX351 is via USB port. The QX351
OCS can communicate with Cscape using USB to USB, USB to serial adapters, serial port
communications via MJ1/MJ2 Port, onboard Ethernet Port, CAN (CsCAN) or modems. For
communications other than USB or the MJ1/MJ2 port please refer to the manual which ships with the
communications adapter hardware being used for programming.
13.3.1 To connect QX351 with USB port: (Preferred method)
Connect a PC’s (Personal Computer running a Windows Microsoft operating system) USB port via USB
cable to the USB mini B port on the QX351 OCS.
The PC will detect a new device has been plugged into the USB port.
Figure 13.1: Front Panel and USB Programming Connector