Horner APG QX351 OCS HEQX351C103 - Manual (Page 10)

CH.1 MAN0892-03-EN
February 25, 2010 Page 10 of 109 # 1039
•
Make sure the unit is turned OFF before making connection to terminals. Make sure all circuits
are de-energized before making connections.
•
Before each use, inspect all cables for breaks or cracks in the insulation. Replace immediately if
defective.
1.2
Grounding
Grounding is covered in various chapters within this manual.
•
For grounding specifications and testing for a good ground, refer to section 4.2
•
For Panel grounding, refer to section 4.3
1.3
CE Compliance
To check for compliance and updates, visit our website at:
http://www.heapg.com/Pages/TechSupport/ProductCert.html