Horner APG QX351 OCS HEQX351C103 - Manual (Page 88)

CH. 14 MAN0892-03-EN
February 25, 2010 Page 88 of 109 # 1039
5. Set the ‘Enable AutoRun’ option to YES if the controller needs to be placed in RUN mode
automatically after automatic restore of data or AutoLoad operation.
14.3
Backup / Restore Data
Selecting this option brings up a screen having four operations:
•
Backup OCS Data.
•
Restore OCS Data.
•
Clear Backup Data.
•
Exit
Figure 14.2: Backup / Restore Data
Backup OCS Data:
Figure 14.3: Backup Registers
When initiated, this will allow the user to manually copy Battery-Backed RAM contents on to the onboard
FLASH memory of the OCS. This will have the effect of backing up all the registers and controller
settings (Network ID, etc.) that would otherwise be lost due to a battery failure.
%SR164.4 is set to 1 when backup operation is performed.